Author Topic: Guidelines and Installation Emergency Lights Mod V7 (Read 21603 times)

Nexxt · « **Reply #20 on:** October 20, 2009, 18:23:31 pm »

Quote from: Scott Kenney on October 20, 2009, 15:43:53 pm

I've made a discovery while testing out the mod Yesterday.
When you've activiated it while being in the driver seat, it works fine and its synced to everyone. Meaning it can be seen by all.
Now when you leave the driver seat, it loses synch and can no longer be seen by anyone but you. Sitting in the passenger side while its going will not change this.

Just figured I would tell you guys. Sorry if im late on this.

You shouldnt use it after leaving the driverseat.
Because this will cause crashes for you

Atunzuman · « **Reply #21 on:** October 21, 2009, 03:23:54 am »

Does anyone know how to had ELM Enabled lights to a car,

I need to add it to these series of 1992 Ford Crown Victorias

http://www.gtainside.com/en/download.php?do=cat&id=174&start=14&orderBy=
(Towards Mid-Bottom)

http://www.gtainside.com/en/download.php?do=cat&id=174&start=21&orderBy=
(Top)

Help would be appreciated!

Chief J. Schappell · « **Reply #22 on:** October 21, 2009, 08:20:15 am »

Quote from: Scott Kenney on October 20, 2009, 15:43:53 pm

I've made a discovery while testing out the mod Yesterday.
When you've activiated it while being in the driver seat, it works fine and its synced to everyone. Meaning it can be seen by all.
Now when you leave the driver seat, it loses synch and can no longer be seen by anyone but you. Sitting in the passenger side while its going will not change this.

Just figured I would tell you guys. Sorry if im late on this.

That was done to reduce server load.

Nexxt · « **Reply #23 on:** October 21, 2009, 12:35:42 pm »

Quote from: Atunzuman on October 21, 2009, 03:23:54 am

Does anyone know how to had ELM Enabled lights to a car,

I need to add it to these series of 1992 Ford Crown Victorias

http://www.gtainside.com/en/download.php?do=cat&id=174&start=14&orderBy=
(Towards Mid-Bottom)

http://www.gtainside.com/en/download.php?do=cat&id=174&start=21&orderBy=
(Top)

Help would be appreciated!

You need to edit the model.
And no, I can't do that.

Atunzuman · « **Reply #24 on:** October 22, 2009, 06:32:08 am »

do you know how i can do this and wat i would need?

Philip McRay · « **Reply #25 on:** October 22, 2009, 22:50:57 pm »

Thanks, Nexxt! This mode is AWESOME!

Nexxt · « **Reply #26 on:** October 23, 2009, 14:03:51 pm »

Quote from: Philip McRay on October 22, 2009, 22:50:57 pm

Thanks, Nexxt! This mode is AWESOME!

No thanks my friend! =)

Philip McRay · « **Reply #27 on:** October 23, 2009, 15:24:37 pm »

is it only for me it's hard to change the "blink" things? It's not my keyboard, becouse it works in other ways but not in SAMP.

Chief J. Schappell · « **Reply #28 on:** October 23, 2009, 23:44:18 pm »

Some buttons must be held for a moment rather than tapped or pushed.

Philip McRay · « **Reply #29 on:** October 24, 2009, 00:37:34 am »

Quote from: SugarD on October 23, 2009, 23:44:18 pm

Some buttons must be held for a moment rather than tapped or pushed.

Ah ok

Nick_E · « **Reply #30 on:** October 27, 2009, 14:10:31 pm »

i installed V7 , i watch a cleo V7 name in SA-MP 0.3a , but i dont see new cars , why ? i tryed on normal police cars and i pushed F11 and i dont see any thing ? why ? i should wait to the cars spawn or what ?

jemerson · « **Reply #31 on:** October 27, 2009, 15:02:16 pm »

Activate your lights by pressing the F12 key. Once activated you can change your light pattern using the programmed 7 choices. To do that use your arrow keys to go up and down then select the one you want by pressing your horn key.

Frederick · « **Reply #32 on:** October 28, 2009, 00:36:26 am »

Quote from: Nick_E on October 27, 2009, 14:10:31 pm

i installed V7 , i watch a cleo V7 name in SA-MP 0.3a , but i dont see new cars , why ? i tryed on normal police cars and i pushed F11 and i dont see any thing ? why ? i should wait to the cars spawn or what ?

Buddy, if you're wanting to get a vehicle to replace your police cruiser(s) in-game, as shown in the video promoting ELM V7, then you're not looking at Cleo. All this modification does is allow your cruiser(s) lights to flash like on a real-life police car. It has nothing to do with changing, editing, or replacing your vehicle models in-game.

Bobby Duke · « **Reply #33 on:** October 29, 2009, 02:34:05 am »

Dont know what I'm doing wrong...I re-installed 5 times and it still doesn't work

I think i will wait for that other lightmod unless someone fixes this one........
(I'm having the same problem as Pepper)

Nexxt · « **Reply #34 on:** December 15, 2009, 14:22:56 pm »

bumb =)

Bobby Duke · « **Reply #35 on:** December 15, 2009, 21:40:20 pm »

Quote from: [SASD]Bob_Norris on October 29, 2009, 02:34:05 am

Dont know what I'm doing wrong...I re-installed 5 times and it still doesn't work I think i will wait for that other lightmod unless someone fixes this one........
(I'm having the same problem as Pepper)

Yea thanks to a fellow SASD member, I got it working (Don't ask how i have no idea

)

EmergencyLight · « **Reply #36 on:** May 04, 2012, 01:55:32 am »

I've been frantically trying to find this emergency light mod, but could only find this http://www.emergencylights.net

can someone help me out please?!

Cane · « **Reply #37 on:** May 04, 2012, 01:59:27 am »

Quote from: EmergencyLight on May 04, 2012, 01:55:32 am

I've been frantically trying to find this emergency light mod, but could only find this http://www.emergencylights.net

can someone help me out please?!

http://www.youtube.com/watch?v=QRtZgwoR3rk

Could've googled "emergency light mod gta sa"...

Chief J. Schappell · « **Reply #38 on:** May 04, 2012, 02:04:51 am »

http://gtapolicemods.com/downloads.php?do=file&id=1380

Goodandy · « **Reply #39 on:** May 04, 2012, 05:11:05 am »

Try not bumping topics siting here since 2009.

Lock.

User Info

Recent Posts

Who's Online

Search

Author Topic: Guidelines and Installation Emergency Lights Mod V7 (Read 21603 times)

jemerson

Frederick